<tbody id="hofyp"></tbody>
    <bdo id="hofyp"><dfn id="hofyp"></dfn></bdo>
    <track id="hofyp"><div id="hofyp"></div></track>

      <menuitem id="hofyp"><strong id="hofyp"></strong></menuitem>
      <menuitem id="hofyp"><dfn id="hofyp"></dfn></menuitem>
      <menuitem id="hofyp"></menuitem>
      <track id="hofyp"></track>
    1. <track id="hofyp"><div id="hofyp"></div></track>

      <track id="hofyp"><div id="hofyp"></div></track>

      <bdo id="hofyp"></bdo> <tbody id="hofyp"><div id="hofyp"><address id="hofyp"></address></div></tbody><bdo id="hofyp"><optgroup id="hofyp"></optgroup></bdo>
      <bdo id="hofyp"><dfn id="hofyp"></dfn></bdo>
    2. <bdo id="hofyp"><optgroup id="hofyp"><menu id="hofyp"></menu></optgroup></bdo>

      聯系我們| 收藏本站| 在線留言| RSS訂閱

      歡迎您來到江蘇旭陽化工設備有限公司!

      江蘇旭陽化工設備有限公司

      專業高效產品優良,質量可靠

      全國咨詢熱線18921733114

      聯系我們

      咨詢熱線:0523-84622588

      電話:0523-84622588

      傳真:0523-84622290

      銷售部-15061030877、13301428345、0523-84622260

      凌海煉-18115293118(修補材料部)

      張小美-15061032118(修補業務部)

      辦公地址:江蘇省靖江市城南世紀廣場1區25幢01

      生產地址:江蘇省靖江市城南經濟開發區永益路一號

      當前位置:首頁 » 新聞中心 > 新聞動態

      不銹鋼反應釜的維護要素有哪些?

      發布時間:2020-12-07 10:18:39      點擊:

      不銹鋼反應釜的維護要素有哪些?
      1.拆卸前,應將釜內的反應物料排出,用4種對人體無影響的氣液介質清洗,以避免釜內物料對拆卸人員的影響。
      2.定期檢查下攪拌軸的擺動量。如果發現擺動量大,按照結構圖拆卸更換軸承和軸套。
      3.更換維修釜中的葉片、擋板、導流管等部件,松開主螺栓和螺母,提起釜蓋,逐一拆卸。
      4.不銹鋼反應釜檢修時,不必打開壺蓋。只需松開與壺蓋連接的螺母,然后提起驅動器。然后拆下與內磁鋼連接的螺絲,下攪拌軸仍放在釜內。
      5.高溫高速磁力攪拌器的上部設有注油孔,用于停車時向軸承內注入潤滑脂。只有把釜內壓力去掉后才能使用,每次加30-50°C。
      6.整個檢修過程:每種情況下,嚴禁用錘子隨意敲打所有部件,以免影響不銹鋼反應釜的安裝精度。

      What are the maintenance elements of stainless steel reactor?
      1. Before disassembly, the reaction materials in the kettle should be discharged and cleaned with 4 kinds of gas-liquid media that have no effect on the human body to avoid the influence of the materials in the kettle on the disassembly personnel.
      2. Regularly check the swing of the stirring shaft. If you find a large amount of swing, disassemble and replace the bearing and sleeve according to the structure diagram.
      3. Replace the blades, baffles, guide pipes and other parts in the maintenance kettle, loosen the main bolts and nuts, lift the kettle cover, and disassemble them one by one.
      4. There is no need to open the lid of the stainless steel reactor during maintenance. Just loosen the nut attached to the lid and lift the driver. Then remove the screws connected to the inner magnet, and the lower stirring shaft is still in the kettle.
      5. The upper part of the high temperature and high speed magnetic stirrer is equipped with an oil injection hole, which is used to inject grease into the bearing when it is stopped. It can be used only after the pressure in the kettle is removed, adding 30-50°C each time.
      6. The entire maintenance process: in each case, it is strictly forbidden to hit all parts with a hammer at will, so as not to affect the installation accuracy of the stainless steel reactor.

      網站首頁關于我們新聞中心產品中心發貨現場聯系我們

      江蘇旭陽化工設備有限公司 
      熱門搜索:無錫化工儲罐非標設備不銹鋼反應罐纏繞式加熱換熱器高壓化工設備
      電話:0523-84622588
      傳真:0523-84622290
      辦公地址:江蘇省靖江市城南世紀廣場1區25幢01
      生產地址:江蘇省靖江市城南經濟開發區永益路一號
      備案號:蘇ICP備16042953號

      彩票开户